Nimonic Alloy 901 Ni-Cr-Fe High Temperature Resistant Alloy Material (2.4662)

Product Description

Product Description

Nimonic Alloy 901 Ni-Cr-Fe High Temperature Resistant Alloy Material (2.4662)

Incoloy 901 (UNS N09901/Din 1.4898)
A nickel-iron-chromium alloy containing titanium and aluminum for precipitation hardening and molybdenum for solid-solution strengthening. The alloy has high yield strength and creep resistance at temperatures to about 1110°F (600°C). A subtantial iron content enables the alloy to combine high strength with good forging characteristics. Used in gas turbines for discs and shafts. Standard products form is round. 

Incoloy 901 Chemical composition:

Alloy	%	Ni	Cu	Al	Fe	Ti	Co	Mn	S	C	Si	P	Cr	Mo	B
Incoloy 901	Min.	40.0				2.35							11.0	5.0	0.01
	Max.	45.0	0.50	0.35	Balance	3.10	1.0	1.0	0.03	0.10	0.60	0.03	14.0	7.0	0.02

Incoloy 901 Physical properties:

Density	8.14 g/cm3
Melting point	1280-1345ºC

Incoloy 901 minimum mechanical properties in the room temperature:

Status	Tensile strength Rm N/mm2	Yield strength RP0.2N/mm2	Elongation A5 %
Incoloy 901	1034	689	12

Corrosion Resistance
Alloy 901 has good corrosion resistance to the atmospheres normally found in jet engine operations. It has slightly lower scaling resistance than such alloy as Types 309 and 310 stainless steel.

Hot Working
Alloy 901 is forged between 2050°F (1121°C) and 1850°F (1010°C), metal temperature. Light hot work may be continued down to 1600°F (871°C) but not below. Metal temperature should not exceed 2050°F (1121°C) during rapid working. Billets should be charged into a hot furnace and heated rapidly through the precipitation hardening range.
 
Weldability
Alloy 901 can be welded by the inert-gas-arc method. It is difficult to weld. All welding should be done in the solution treated condition. Cold worked parts should be re-solution treated before welding. A re-solution treatment is recommended after welding before stabilizing and aging.

Specifications

Nickel Sheet
Thickness	0.3mm - 6.0mm
Width	1000mm - 2200mm
Length	Produce as requirement
Nickel Plate
Thickness	3.0mm - 300mm
Width	1000mm - 3000mm
Length	Produce as requirement
Nickel Strip / Nickel Foil
Thickness	0.02mm - 16.0mm
Width	5mm - 900mm
Nickel Coil
Thickness	0.3mm - 16.0mm
Width	1000mm - 3000mm
Nickel Pipe
Outside Diameter	6.0mm - 1219mm
Thickness	0.5mm - 100mm
Nickel Capillary Pipe
Outside Diameter	0.5mm - 6.0mm
Thickness	0.05mm - 2.0mm
Nickel Bar
Diameter	Ф4mm - Ф600mm
Nickel Wire Rod
Diameter	Ф0.01mm - Ф6.0mm

Main Products

 

Inconel	Inconel 722, Inconel 725, Inconel X-750, Inconel 625, Inconel 686, Inconel 690, Inconel 702, Inconel 706, Inconel 713C, Inconel 600, Inconel 601, Inconel 602CA, Inconel 617, Inconel 718.
Incoloy	Incoloy 945, Incoloy A-286, Incoloy 901, Incoloy 903, Incoloy 907, Incoloy 909, Incoloy 925, Incoloy 926, Incoloy 330, Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 801, Incoloy 840, Incoloy 20, Incoloy 205, Incoloy 208
Hastelloy	Hastelloy C 276, Hastelloy G, Hastelloy W, Hastelloy X, Hastelloy G-30, Hastelloy G-35, Hastelloy G3, Hastelloy N, Hastelloy S, B-2, Hastelloy B-3, Hastelloy C2000, Hastelloy C22
Haynes	Haynes 75, Haynes 244, Haynes 25, Haynes 263, Haynes 282, Haynes 556, Haynes 188, Haynes 230, Haynes 233, Haynes 242
Monel	Monel 400, Monel K-500, Monel R405, Monel 401, Monel 404, Monel 405.
Nimonic	Nimonic 91, Nimonic C263, Nimonic PE11, Nimonic PE16, Nimonic PK33, Nimonic 80A, Nimonic 96, Nimonic 90, Nimonic 901, Nimonic 105, Nimonic 115
Other Nickel	Waspaloy, Multimet N155, Mumetal 80, Rene 41, Kovar, Maraging 250, Maraging 300, Maraging 350, MP159, MP35N, Alloy 46, Alloy 48, Alloy 52, Alloy 42, Alloy 45, Cobalt alloy 6b, Custom 455, Invar 36, Invar 42, Nickel 200, Nickel 201

Detailed Photos

Company Profile

Equipment and Process

Application

Packaging