| Customization: | Available |
|---|---|
| Type: | Alloy Steel |
| Standard: | AISI, ASTM, DIN, JIS, GB, BS |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
EN 1.8550 steel is an alloy steel formulated for primary forming into wrought products. Cited properties are appropriate for the quenched and tempered condition. 1.8550 is the EN numeric designation for this material. 34CrAlNi7-10 is the EN chemical designation.
It has a moderately low melting temperature among EN wrought alloy steels. In addition, it has a moderately high electrical conductivity and a moderately low thermal conductivity.
The graph bars on the material properties cards below compare EN 1.8550 steel to: EN wrought alloy steels (top), all iron alloys (middle), and the entire database (bottom). A full bar means this is the highest value in the relevant set. A half-full bar means it's 50% of the highest, and so on.
1.8550 is intended for work at elevated temperatures in an environment that requires high sliding properties, corrosion, temperature, abrasion, and fatigue resistance. Steel with the addition of Nickel and Aluminum used in the energy, machinery, and automotive industries for large cross-sections elements in the heat treated condition. The products are used in the manufacture of screws, rods, cylinders, pistons, gears, extruders, and rings, which do not require welding.
Heat treatment of 34CrAlNi7-10, 1.8550:
Softening annealing at a temperature of 650 - 700 ºC
Hardening at 870 - 930 ºC for at least half an hour with cooling in water or oil Tempering at 580 - 700ºC for a minimum of 700 hour Nitriding at a temperature of 480 - 570ºC
1 Hot rolling process
2 Hot Forging: Electro-hydraulic; High-speed-hydraulic; Oil-hydraulic; Precision-forging
1 +A: Annealed (full/soft/spheroidizing)
2 +N: Normalized
3 +NT: Normalized and tempered
4 +QT: Quenched and tempered (water/oil)
1 Black Surface
2 Grounded: Bright but rough ; Not precision
3 Machining for plate: Bright and precision; Little turning scar
4 Peeled/Turned: Bright and precision; Little turning scar
5 Polished: Very Bright and precision size; Not turning scar
1 Cutting: Small pieces
2 CNC Machine: Produce as your drawing
3 Package: Bare/Nylon/Canvas/Wooden
4 Payment:T/T, L/C, O/A(request credit)
5 Transport:FOB/CFR/CIF/DDU/DDP (train/ship/Air)
EN 10204/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.
| COLD WORK TOOL STEEL | |||||
| Grade | AISI /ASTM | DIN (W.Nr) | JIS | EN/ BS | GB |
| DC53 | higher than D2 | SKD11 | XW-5 | Cr8Mo2Vsi | |
| D2 | D2 | 1.2379 | SKD11 | BD2 | CR12MO1V1 |
| Cr12MoV | CR12MOV | ||||
| D3 | D3 | 1.2080 | SKD1 | BD3 | CR12 |
| O1 | O1 | 1.2510 | SKS3 | 9CRWMN | |
| HMD5 | HMD5 | 7CrSiMnMoV | |||
| 5CrNiMo | L6 | 55NiCrMoV6 | SKT4 | 5CrNiMo | |
| 52100 | 52100 | 1.3505 | EN31 | GCR15 | |
| HOT WORK TOOL STEEL | |||||
| H13 | H13 | 1.2344/1.2342 | SKD61/DAC | 8407 | 4CR5MOSIV1 |
| FDAC | 1.2347 | FDAC | FDAC | ||
| H11 | H11 | 1.2343 | SKD6 | H11 | |
| 3Cr2W8V | H21 | 1.2581/ X30WCrV93 | SKD5 | BH21 | 3CR2W8V |
| PLASTIC MOULD STEEL | |||||
| P20 | P20 | 1.2311 | HPM7/PX88 | 618 | 3CR2MO |
| 718 | P20+NI | 1.2738 | PX4/PX5 | 718 | 3CR2NIMO |
| S136 | 420 | 1.2083 | S-STAR | S136 | 4CR13 |
| NAK80 | P21 /P20+S | 1.2312 | NAK80 | 15NI3MN | |
| HIGH SPEED STEEL | |||||
| M2 | M2 | SKH51 | W6MO5CR4V2 | ||
| M42 | M42 | S2-10-1-8 | SKH59 | W2MO9CR4VCO8 | |
| ALLOY STRUCTURE STEEL | |||||
| Grade | AISI /ASTM | DIN (W.Nr) | JIS | EN/ BS | GB |
| 5120 | 5120 | 1.7027 /21Cr4 | SCr420 | 20Cr | |
| 530M40 /5140 | 530M40 /5140 | 1.7035 /41Cr4 | SCr440 | 40Cr | |
| 5145 | 5145 | Scr445 | 45CR4 | ||
| 4118 | 4118 | 1.7243 /18CrMo4 | SCM418 / SCM420 | 20CrMo | |
| 4135 | 4130 | 1.7218 /25CrMo4 | SCM430 | 708A25/ 708M25 | 30CrMo |
| 4140 | 4140 | 1.7225 /42CrMo4 | SCM440 | EN19/ 709M40 | 42CrMo |
| 4340 | 4340 | 1.6582/ 34CrNiMo6 | SNCM 439/ SNCM8 | EN24/ 817M40 | 40CrNi2Mo |
| 8620 | 8620 | 1.6523/ 21NiCrMo2 | SNCM220 | 805M20 | 20CrNiMo |
| CARBON STEEL | |||||
| 20 | 1020 | C22. CK22 | S20C | EN3B /070M20 | 20 |
| 35 | 1035 | C35.CK35 | S35C | 35 | |
| 45 | 1045 | C45.CK45 | S45C | EN8D/C45E | 45 |
| 50 | 1050 | CK53 | S50C | EN9/070M55 | 50 |
| Q355 | S355J /ST52 | EN14 | Q355 | ||
| 30Mn | 1030.1033 | S30C | 30Mn | ||
| 30Mn2 | 1330 | 30Mn5 | SMn433h | 30Mn2 | |
| STAINLESS STEEL | |||||
| steel grades: 304, 304L, 316, 316L, 321, 410 430, 431, 2205, 2304, 2507. F53, F55 | |||||
){kind=link}