Factory Outlet Modernization Industry Leading Polished High Quality 276/ B-2/B/B-3/C-4/C-22/S/ C-2000/G-30/G-35/230/556/230/188/X/N Hastelloy Bar

Product Description

Product Description

1)Alloy C-276 has excellent resistance to localized corrosion, stress corrosion cracking, and to both oxidizing and reducing media, thus making it suitable for a wide variety of chemical process environments, including ferric and cupric chlorides, hot contaminated media (organic and inorganic), formic and acetic acids, seawater and brine solutions. It is one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite and chlorine dioxide.
 

2)Alloy B-2 has outstanding resistance to hydrochloric acid at all concentrations and temperatures. It also has significant resistance to reducing environments like sulfuric, phosphoric, acetic acids and other nonoxidizing media. Alloy B-2 has excellent resistance to pitting corrosion, stress corrosion cracking, and

knife line and weld heat-affected zone attack. Alloy B-2 has poor resistance to oxidizing environments, therefore, it should not be used where ferric or cupric salts are present as these salts may cause rapid corrosion failure.
 

3)N10001 has excellent resistance to reducing environments like sulfuric acid at moderate concentrations and other nonoxidizing acids. It also resists stress corrosion cracking induced by chlorides. N10001 has poor resistance to oxidizing environments, therefore, it should not be used where ferric or cupric salts are present as these salts may cause rapid corrosion failure.
 

4)N10675 has outstanding resistance to hydrochloric acid at all concentrations and temperatures. It also resists sulfuric, phosphoric, formic, acetic acids and other nonoxidizing media. It has excellent resistance to pitting corrosion, stress corrosion cracking, and knife line and weld heat-affected zone attack. N10675 has greater thermal stability than N10665.
 

5)Alloy C-4 has outstanding high-temperature stability, and has excellent resistance to stress-corrosion cracking and oxidizing atmospheres up to 1040ºC. It has exceptional resistance to a wide variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine and chlorine contaminated media (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions.

 

6)Alloy C-22 is a versatile Ni-Cr-Mo-W alloy with better comprehensive corrosion resistance performance than other Ni-Cr-Mo alloys, including Alloy C-276, Alloy C-4 and Alloy 625. Alloy C-22 has outstanding resistance to pitting, crevice corrosion and stress corrosion cracking. It has excellent resistance to oxidizing aqueous media including wet chlorine and mixtures containing nitric or oxidizing acids with chloride ions. It also offers optimum resistance to environments where reducing and oxidizing conditions are encountered in process streams. So it can be used where "upset" conditions are likely to occur or in multi-purpose

plants. Alloy C-22 has exceptional resistance to a wide variety of chemical process environments, including strong oxidizers such as ferric and cupric chlorides, chlorine, hot contaminated solutions (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions. It resists the formation of grain boundary precipitates in the weld heat-affected zone, thus making it suitable for most chemical process applications in the as-welded condition.
 

7)Alloy S has excellent thermal stability, low thermal expansion and excellent oxidation resistance at 1093ºC. It has good high temperature and thermal fatigue strength. It retains its strength and ductility after aging at temperatures of 427 to 871ºC. Alloy S is particularly suitable for cyclical heating conditions where

components must be capable of retaining their strength, ductility and metallurgical integrity after long time exposure.

8)N06200 is a versatile corrosion resistant alloy with excellent resistance to uniform corrosion in oxidizing or reducing environments. It resists all acids,especially hydrochloric, sulfuric and hydrofluoric acids, at wide temperature ranges, and also resists pitting corrosion, crevice corrosion and stress corrosion cracking induced by chlorides and other halide solutions.

 

9)N06030 is a high chromium nickel-base alloy which has superior corrosion resistance over most other nickel and iron-base alloys in commercial phosphoric acid as well as many complex environments containing highly oxidizing acids such as nitric/hydrochloric, nitric/hydrofluoric and sulfuric acids. It resists the formation of grain boundary precipitates in the heat-affected zone, making it suitable for use in most chemical process environments in the as-welded condition.

10)N06035 is an upgrade version of N06030. It has extraordinary resistance in the wet process phosphoric acid production environment, which is widely used in fertilizer production. Its performance in this environment is far superior to N06035 and stainless steels. It can also resist localized corrosion and chloride-induced stress corrosion cracking in chlorides containing media.

11)Alloy X is a nickel-chromium-iron-molybdenum alloy with an exceptional combination of high temperature strength, oxidation resistance and fabricability. It shows good ductility after prolonged exposure at temperatures up to 870ºC for 16000 hours. It also has excellent resistance to stress corrosion cracking in petrochemical applications.
 

12)Alloy N has excellent oxidation resistance to hot fluoride salts in the temperature range of 704 to 871°C. It has good oxidation resistance in air. It also has good fabricability and good resistance to aging and embrittlement.

13)N06230 combines excellent high temperature strength, outstanding resistance to oxidizing environments up to 1149°C for prolonged exposure, premier resistance to nitriding environments, and excellent long term thermal stability. It has low thermal expansion than most high temperature alloys, and good resistance to grain coarsening with prolonged exposure to high temperatures.
 

14)R30556 combines effective resistance to sulfidizing, carburizing and chlorine-bearing environments at high temperatures with good oxidation resistance, fabricability and excellent high temperature strength. It also resists to corrosion by molten zinc, molten chloride salts and other salts.

15)Alloy 188 combines excellent high temperature strength with very good resistance to oxidizing environments up to 1095°C for prolonged exposure, and excellent resistance to sulfate deposit hot corrosion. It also has excellent resistance to molten chloride salts, and good resistance to gaseous sulfidation.
 

CHEMICAL COMPOSITION

%	C	Mn	Fe	S	Si	Cu	Ni	Al	Ti
Hastelloy B	≤0.05	≤1.0	4.0-6.0	≤0.03	≤1.0		balance
Hastelloy B-2	≤0.01	≤1.0	≤2.0	≤0.03	≤0.01		balance
Hastelloy C	≤0.08	≤1.0	4.0-7.0	≤0.03	≤1.0		50.0-58.0
Hastelloy C-4	≤0.015	≤1.0	≤3.0	≤0.03	≤0.08		balance		≤0.7
Hastelloy C-22	≤0.015	≤0.5	2.0-6.0	≤0.35	≤0.08		balance
Hastelloy C-276	≤0.08	≤1.0	4.0-7.0	≤0.03	≤1.0		balance
Hastelloy C-2000	≤0.01	≤0.5	≤3.0	≤0.01	≤0.08	1.3-1.9	balance	≤0.5
Hastelloy G-30	≤0.03	0.3-1.5	13.0-17.0	≤0.02	0.2-0.8	1.0-2.4	balance
Hastelloy G-35	≤0.05	≤0.5	≤2.0	≤0.015	≤0.6	≤0.30	balance	≤0.4
Hastelloy X	0.05-0.15	≤1.0	17.0-20.0	≤0.03	≤1.0		balance
Hastelloy S	≤0.02	0.3-1.0	≤3.0	≤0.015	0.2-0.75		balance	0.1-0.5

  

PHYSICAL PROPERTIES

 

Alloy	Tensile Strength	Yield Strength	Rate of Elongation
	Rm N/mm2	RP0.2N/mm2	A5%
Hastelloy B	≥760	≥350	≥40
Hastelloy B-2	≥760	≥350	≥40
Hastelloy C	690	310	40
Hastelloy C-4	≥690	≥276	≥40
Hastelloy C-22	≥690	≥310	≥45
Hastelloy C-276	≥690	≥283	≥40
Hastelloy C-2000	≥690	≥283	≥45
Hastelloy G-30	≥586	≥241	≥30
Hastelloy X	≥586	≥241	≥30
Hastelloy S	≥110	≥52	≥46

 

Specifications

Nickel Sheet
Thickness	0.3mm - 6.0mm
Width	1000mm - 2200mm
Length	Produce as requirement
Nickel Plate
Thickness	3.0mm - 300mm
Width	1000mm - 3000mm
Length	Produce as requirement
Nickel Strip / Nickel Foil
Thickness	0.02mm - 16.0mm
Width	5mm - 900mm
Nickel Coil
Thickness	0.3mm - 16.0mm
Width	1000mm - 3000mm
Nickel Pipe
Outside Diameter	6.0mm - 1219mm
Thickness	0.5mm - 100mm
Nickel Capillary Pipe
Outside Diameter	0.5mm - 6.0mm
Thickness	0.05mm - 2.0mm
Nickel Bar
Diameter	Ф4mm - Ф600mm
Nickel Wire Rod
Diameter	Ф0.01mm - Ф6.0mm

Main Products

 

Inconel	Inconel 722, Inconel 725, Inconel X-750, Inconel 625, Inconel 686, Inconel 690, Inconel 702, Inconel 706, Inconel 713C, Inconel 600, Inconel 601, Inconel 602CA, Inconel 617, Inconel 718.
Incoloy	Incoloy 945, Incoloy A-286, Incoloy 901, Incoloy 903, Incoloy 907, Incoloy 909, Incoloy 925, Incoloy 926, Incoloy 330, Incoloy 800, Incoloy 800H, Incoloy 800HT, Incoloy 801, Incoloy 840, Incoloy 20, Incoloy 205, Incoloy 208
Hastelloy	Hastelloy C 276, Hastelloy G, Hastelloy W, Hastelloy X, Hastelloy G-30, Hastelloy G-35, Hastelloy G3, Hastelloy N, Hastelloy S, B-2, Hastelloy B-3, Hastelloy C2000, Hastelloy C22
Haynes	Haynes 75, Haynes 244, Haynes 25, Haynes 263, Haynes 282, Haynes 556, Haynes 188, Haynes 230, Haynes 233, Haynes 242
Monel	Monel 400, Monel K-500, Monel R405, Monel 401, Monel 404, Monel 405.
Nimonic	Nimonic 91, Nimonic C263, Nimonic PE11, Nimonic PE16, Nimonic PK33, Nimonic 80A, Nimonic 96, Nimonic 90, Nimonic 901, Nimonic 105, Nimonic 115
Other Nickel	Waspaloy, Multimet N155, Mumetal 80, Rene 41, Kovar, Maraging 250, Maraging 300, Maraging 350, MP159, MP35N, Alloy 46, Alloy 48, Alloy 52, Alloy 42, Alloy 45, Cobalt alloy 6b, Custom 455, Invar 36, Invar 42, Nickel 200, Nickel 201

Detailed Photos

Company Profile

Equipment and Process

Application

Packaging