Customization: | Available |
---|---|
Type: | Alloy Steel Bar |
Standard: | AISI, ASTM, DIN, JIS, GB, BS |
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Steel Grade | H13/1.2344/SKD61 |
Dimension | Thickness 5-500mm / Diameter 5-600mm |
Delivery Condition | Annealed |
Surface Treatment | Black Surface / Milled Surface |
Production Condition | Two Sides Cut or Four Sides Cut for Round Bar |
Stock Quantity | 3000 tons |
Ultrasonic Test | Sep1921-84 D/D or E/e with 100% Test |
Lead Time | 7-10 days |
Typical Chemical Composition of SKD61/H13/1.2344(%)
C | Si | Mn | P | S | Cr | Mo | V |
0.35-0.45 | 0.80-1.20 | 0.20-0.50 | ≤0.03 | ≤0.03 | 4.80-5.50 | 1.20-1.75 | 0.90-1.20 |
Standard | AISI/SAE | W.Nr/DIN | JIS | GB |
Grade | H13 | 1.2344 | SKD61 | 4Cr5MoSiV1 |
Heat Treatment of H13 / 1.2344 / SKD61 steel
Annealing: 750 to 800ºC, slow cooling in furnace (10-20ºC/hr), down to 600ºC, cooling in air. Hardness after annealing: max. 230 HB.
Stress relieving: 600 to 650ºC, slow cooling in furnace. Hold in neutral atmosphere for 1 to 2hours.
Hardening: 1020 to 1080ºC, oil/air, hold 20 to 30 minutes. Hardness , 52 to 56 HRC in oil, 50 to 54 HRC in air.
Tempering: 560 to 580ºC. Slowly heating to tempering temperature right after hardening. Recommended to temper at least twice. The second tempering temperature shall be approx. 20 to 30ºC lower than the first tempering.
Tempering ºC |
300 |
400 |
500 |
600 |
HRC |
53 |
54 |
55 |
50 |
* Hardening temperature: 1050ºC, specimen size: dia50mm
Surface treatment:
Nitriding: Suited for both bath and gas nitriding.
Properties:
Excellent hot tensile properties, high hot wear resistance, good machinability, high toughness and heat checking resistance. Recommended working temperature under than 540ºC.
Application
Axles Various, Bolts, Connecting Rods, Hydraulic Clamps and Rams, Pins Various, Rolls Various, Studs, Shafts, Spindles etc.
Alloy Steel | 4140,4142,42CrMo4,1.7225,SCM440,4130,SCM430,25CrMo4,1.7218,34CrNiMo6, 1.6582,4340,SNCM439,36CrNiMo4,1.6511,SACN645,1340,SMn438,SNC236, |
Tool Steel | H13,1.2344,SKD61,D2,SKD11,1.2379,1.2510,01,SKS3,95MnWCr5,D3,SKD1,1.2419, SKS31,H21,SKD5,1.2581,P20,35CrMo7,1.2738,1.2316,M2 |
Bearing Steel | GCr15,52100,SUJ1,SUJ2,100Cr6,1.2067,55C,8620,4320,9310,440C,M50 |
Spring Steel | 9260,SUP6,SUP7,1.7108,54SiCr6,1.7102,5155,SUP9,1.7176,5160,1.7177,6150, SUP10,51CrV4,1.8159 |
Stainless Steel | 321,sus321,1.4541,304,SUS304,1.4301,410,SUS410,1.4006,420,1.4021,1.4028, 434,1.4113,316L,SUS316L,1.4435,630,1.4542,431,1.4057 |